Trend TRE-LOCK/JIG Lock Jig

Trend LOCK JIG Lock Recessing Jig. This jig uses a set of interchangeable templates and with a router will cut the mortise and face-plate recess for popular door locks.\r\nFor most common sash mortises & dead locks, with up to 3in deep mortises and a 7/8in or 1in face-plate.Deeper mortises can be achieved with a suitable size of auger bit.Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.Steel plates & body.The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.Other sizes of template available to special order, please contact Trend Technical Support for more information.\r\nSpecifications\r\n\r\nDoor thickness min.= 34 mm\r\nDoor thickness max.= 58 mm\r\n\r\nIncludes templates for locks having the following face-plate dimensions\r\n\r\nImperial (Metric)= Template\r\n7/8 x 1/8in (22.2×156 mm)= 1\r\n7/8 x 6in (22.5×152.5 mm)= 2\r\n1 x 4 3/4in (25.4×121 mm)= 3\r\n1 x 5in (25.4×127.5 mm)= 4\r\n1 x 5 1/4in (25.4×133.5 mm)= 5\r\n1 x 5 3/4in (25.4×145 mm)= 6\r\n1 x 6in (25.4×153 mm)= 7\r\n1 x 6in (25.4×156.5 mm)= 8\r\n1 x 6 1/2in (25.4×165.5 mm)= 9\r\n1 x 7in (25.4×177 mm)= 10\r\n1 x 2 1/4in (25×57.5 mm)= 11\r\nUPPER 1 x 2 1/4in (26×56.5 mm)= 11\r\nLOWER 1 x 6 3/8in (25.6x162mm= 12\r\nMortise Dimensions Imperial (Metric)= Template\r\n5/8 x 2 7/8in (16×72 mm*+)= A\r\n5/8 x 4 1/4in (16×107 mm*)= B\r\n3/4 x 3 1/8in (19×78 mm*)= C\r\n3/4 x 4 1/4in (19×109 mm*)= D\r\n\r\n*These are maximum mortise length, unless radius ends are squared with a chisel.+Note: actual size of mortise 16 x 79 mm (5/8 x 3 7/64in)\r\nIncludes\r\n\r\n1 x Guide Bush Collar\r\n12 x Face Plate Templates\r\n4 x Mortise Templates\r\n6 x Spacer Fingers\r\n\r\n